• 1996-09 ~ 2000-07    复旦大学     环境科学与工程  学士
• 2000-09 ~ 2003-03    美国新墨西哥矿业和科技学院     材料工程  硕士
• 2003-09 ~ 2007-03    美国新墨西哥矿业和科技学院     材料工程  博士

• 2008-01 ~ 2010-01    美国西北大学  博士后
• 2010-01 ~ 2011-01    美国新墨西哥矿业和科技学院  博士后
• 2011-01 ~ 2022-10    网投十大信誉排名品牌轻合金精密成型国家工程研究中心  讲师

• 铝合金方面主要围绕压铸Al-Si合金的腐蚀性能改善，开发新型高强耐腐蚀压铸铝合金
• 钛合金方向主要钛合金的相变超塑性研究

在美国西北大学博士后期间，师从于相变超塑性方面的专家David C. Dunand教授，在美国波音公司钛粉末相变超塑性致密化研究项目资助下，通过实验、建模和计算机模拟研究了相变超塑性下TC4钛合金粉末致密化过程，研究结果发表在Acta Mater和Metall. Mater. Trans. A上。钛合金的研究在网投十大信誉排名品牌得到了学校新进教师启动计划资助。高强耐腐蚀压铸铝合金铝合金方面的研究得到美国通用公司资助。

• 美国TMS会员  
• Metall. Mater. Trans. A和Wear等杂志论文审稿人  
• 中文核心期刊《热加工工艺》特邀编委  

• Yuan J, Wang Q, Yin D, Wang H, Chen C, Ye B. Creep behavior of Mg–9Gd–1Y–0.5Zr (wt.%) alloy piston by squeeze casting. Mater Charact 2013;78:37-46.
• Guo W, Wang Q, Ye B, Zhou H. Enhanced microstructure homogeneity and mechanical properties of AZ31–Si composite by cyclic closed-die forging. J Alloy Compd 2013;552:409-417.
• Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V/TiC powder blends by transformation mismatch plasticity. Journal of Materials Research 2013:1(doi: 10.1557/jmr.2013.95).
• Wang H, Wang Q, Yin D, Yuan J, Ye B. Tensile creep behavior and microstructure evolution of extruded Mg–10Gd–3Y–0.5Zr (wt%) alloy. Mater. Sci. Eng. A 2013;578:150.
• [2] Zhou H, Wang QD, Ye B, Guo W. Hot deformation and processing maps of as-extruded Mg–9.8Gd–2.7Y–0.4Zr Mg alloy. Mater. Sci. Eng. A 2013;576:101.
• Guo W, Wang Q, Ye B, Zhou H. Microstructure and mechanical properties of AZ31 magnesium alloy processed by cyclic closed-die forging. J Alloy Compd 2013;558:164-171.
• Liang ZX, Ye B, Zhang L, Wang QG, Yang WY, Wang QD. A new high-strength and corrosion-resistant Al–Si based casting alloy. Mater Lett 2013;97:104-107.
• Zhou H, Ye B, Wang QD, Guo W. Uniform fine microstructure and random texture of Mg–9.8Gd–2.7Y–0.4Zr magnesium alloy processed by repeated-upsetting deformation. Mater Lett 2012;83:175-178.
• Miao J, Ye B, Wang Q, Peng T. Mechanical properties and corrosion resistance of Mg–10Gd–2Y–0.5Zr alloy by hot extrusion solid-state recycling. J Alloy Compd 2013;561:184.
• Guo W, Wang Q, Ye B, Li X, Liu X, Zhou H. Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression. Mater. Sci. Eng. A 2012;556:267-270.
• 梁振兴, 叶兵(通讯作者). A380铝合金部件压铸充型、凝固过程的数值模拟. 热加工工艺 2013.（接受，稿件编号：2013013000388）
• Ye B, Matsen M, Dunand D. Finite-Element Modeling of Titanium Powder Densification. Metall. Mater. Trans. A 2012;43:381-390.
• Guo W, Wang QD, Ye B, Liu MP, Peng T, Liu XT, Zhou H. Enhanced microstructure homogeneity and mechanical properties of AZ31 magnesium alloy by repetitive upsetting. Mater. Sci. Eng. A 2012;540:115-122.
• Ye B, Majumdar BS, Dutta I. Texture development and strain hysteresis in a NiTi shape-memory alloy during thermal cycling under load. Acta Mater 2009;57:2403-2417.
• Ye B, Majumdar BS, Dutta I. Texture memory and strain-texture mapping in a NiTi shape memory alloy. Appl Phys Lett 2007;91:61918.
• 袁竭, 王渠东, 陈长江, 尹冬弟, 叶兵. 挤压铸造Mg-9Gd-1Y-0.5Zr活塞的组织与性能. 特种铸造及有色合金 2012;32:907-911.
• Zhou H, Wang Q, Chen J, Ye B, Guo W. Microstructure and mechanical properties of extruded Mg–8.5Gd–2.3Y–1.8Ag–0.4Zr alloy. T Nonferr Metal Soc 2012;22:1891-1895.
• Ye B, Matsen MR, Dunand DC. Enhanced densification of Ti-6Al-4V powders by transformation-mismatch plasticity. Acta Mater 2010;58:3851-3859.
• Ye B, Matsen MR, Dunand DC. Blended elemental powder densification of Ti-6Al-4V by hot pressing. J Mater Res 2011;26:965-969.
• Ye B, Dunand DC. Titanium foams produced by solid-state replication of NaCl powders. Mater. Sci. Eng. A 2010;528:691-697.